FLUX Desktop Requirements
1. Minimum System Requirements
Windows 8 64bit or MacOS 10.11 (El Capitan) 64bit
1.3 GHz dual-core Intel Core i5
2GB of RAM
120mb available disk space
Network interface card (NIC) with ethernet adapter WiFi IEEE 802.11 g/n/ac
Internal/external sound card with in/out stream, 48 kHz/16 bit sampling rate
Internet connection (for license validation purposes only)
To achieve best audio results, we recommend to use high class boom-arm microphone headsets on the desktop and mobile devices.
Windows: Run flux-1.0.0-setup.exe and follow on-screen instructions.
MacOS: Mount flux-1.0.0-setup.dmg and move lineapp-flux to your application folder.
After starting the application, a profile setup window will appear and you are going to be asked to enter following information:
Booking Code (required)
NOTE: To finish the setup, you must provide a valid booking code (license). Read below section 4., for more information.
4. License Activation
eleXom licenses can be purchased at https://booking.lineapp.pro or email@example.com and are required to run the desktop application. After the purchase, you will receive a booking confirmation, containing your booking code. To activate your license, follow these steps:
Open the booking confirmation and find “Booking Code Desktop Device” e.g. 531BF07E5F98-1
Open eleXom and enter the booking code into the “Booking Code” field
Click the “ACTIVATE” button
After successful activation, a “START” button will appear on the screen and you will be able to use eleXom completely offline, until your license expires.
NOTE: To activate your license, your desktop computer must be connected to the internet and must have unrestricted access to https://booking.lineapp.pro. Please make sure the desktop system is able to make HTTP calls to the above URL – you may have to disable your firewall or proxy server before the activation process. The desktop app won’t be useable, until the license activation was successful.
5. Network Settings
The computer running the application must be connected to the same IP network, either via Ethernet cable or WiFi. Please read FLUX network requirements to get more information.
NOTE: Changing the network settings while the application is running might result in unexpected behaviour. To avoid this, please change the settings beforehand or restart the application after the changes have been made.
6. Sound Settings
The application will use the default input and output settings of the computer. Make sure these are configured correctly and will receive/transmit audio.
NOTE: Changing the audio settings while the application is running might result in unexpected behaviour. To avoid this, please change the settings beforehand or restart the application after the changes have been made.
7. Sound Quality
We use mono full band 48KHz, 16bit HiFi quality.
8. Bandwidth Usage
Our patented network technology will adapt bandwidth usage based on the network environment. You should calculate about 20 kilobyte/sec for each stream of audio, so Push-to-Talk takes about 20 kilobyte/sec (half duplex) and a permanent connection about 40 kilobyte/sec - per user.
Please contact us at firstname.lastname@example.org